Air-water heat exchanger

 

Customized air-water heat exchangers for industrial use

Three types of air-water heat exchangers

 

Three different designs o air-water heat exchangers
The Anthermo GmbH delivers three different designs of air-water heat exchangers:

 

  •  Finned tube heat exchangers
  • Lamella heat exchangers
  • Straight tube heat exchangers
     
    These heat exchangers are designed in a way, that inside the tube water or another liquid circulates. The air flows around outside the tubes or the fins/lamellas. The connection between the fins and the tube is used to enlarge the space for heat transfer between the liquid and the gas fluid.
    The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-water heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.
     
    For every heat transfer the right heat exchanger
    We have the necessary expert know how to choose the right type of heat exchanger for your application. The knowledge of more than 300 projects per year gives us the experience to choose the right type of heat exchanger. With this expert knowledge we can analyze your application and consult you professionally.
     
    Certified software and modern production machines
    After choosing the right type of heat exchanger the technical dimensioning is made with certified software as well as a three-dimensional CAD model. The optimization is based on efficiency, economy and loss of pressure. The approved CAD drawing of the customer is the basis for production with modern computer aided production systems.

     
    Available materials
    For the finned tube heat exchangers and the lamella heat exchangers different material combinations between the fins and the tubes are possible. For example the combination between stainless steel (tube) and aluminum (fins) is possible.
    We deliver heat exchangers made of following materials: 1.4301, 1.4404, 1.4571, 1.4828. Materials for fins/lamellas can be different alloys of aluminum or copper or stainless steel materials. Special materials on demand.
     
    Certified software and modern production mashines
    After choosing the right type of heat exchanger we make the technical dimension with certified software and we create a three dimensional CAD modell. The optimation is leaded by efficiency, economy and loss of pressure. The approved CAD drawing of the customer is the basic for the production with modern computer aided production systems.

     
     
    Please contact us.
    We would be glad to receive you inquiry.

    (phone: ++49 2307/94049-0)
    E-Mail: info@anthermo.de
Technische Daten
Materials (Tube and frame)

1.4301, 1.4404 und 1.4571

Materials (fins and lamella)

Alu
Alu-Legierungen
Kupfer
Edelstahl (1.4301, 1.4404 und 1.4571)